Detailed Product Description

ceiling keel

--- Light Steel Keel, Metal Stud

        We are experienced manufacturer & exporter of Ceiling Keel series products for about 10 years. Comparing with the Trading Companies, we have advantages in Lower Price, Quick Delivery and Good Quality Control.

[ PRODUCT FEATURE: ]
        The light steel keel material has very well mechanical property, high precision on size, well linearity, flat panel. It is ametabolic and it can avoid cranny causing by ceiling installation.
        Fixity is very good during installation, with unique pocked technique. It is good for avoiding selftapping screw sidesliping. It not only improve the speed of construction, but also assure the locked-in connection among materials.

[ DRYWALL INSTALLATION: ]
        1. Fasten U keel to the plate according to the 600mm distance, using some fixities.
        2. C keel, U keel, or special keel can be used to reduce cutting.
        3. Make it upright with the wall during installing C keel, using proper fixity to fasten, using screws according to 600mm distance, and install another side of C keel after installing U keel of ceiling.
        4. Put U keel of ceiling on C keel of the wall, fetch a C keel, distance is 600mm to make ceiling upright with U keel, and fasten with proper fixity.
        5. Mark on the floor and ceiling at each 400mm or 600mm distance to decide the installation location of next C keel.
        6. If C keel touches doorframe, the doorframe has to be fastened by fixity or fasten keel calliper on freely keel before fastening the doorframe.

[ CEILING SUSPENSION (Horizontal Suspending) INSTALLATION: ]
        1. According the demand of designer, leave the space for the thickness of plasterboard, and draw a line at the sides of wall. Fasten the side keel with fixity at each 600mm space.
        2. Drawing line on the ceiling at each space of 900mm-1200mm, and mark the location of suspended point.
        3. Fasten the suspender at the marked location of suspended point with fixity.
        4. Insert the main keel into the pendant, adjust the level. And put the end of main keel on the side keel.
        5. The space between main keel should be 900mm-1200mm.
        6. Connect the cross keel and main keel with wedge, the space between cross keel is 400mm, the direction plumbs main keel.
        7. Connect the cut cross keel and cross keel with hanger, space is 600mm, the direction plumbs cross keel.
        8. If the main keel and cross keel is not long enough, you can connect and lengthen them with the relating keel connector.
        9. Fasten plasterboard to the keel as the edge space 150mm and middle space 200mm between screws. The direction of plasterboard long side should be plumbs the cross keel, and short side of plasterboard are installed at crossing slot.

^{[ ABOUT US: ]
        Guangzhou Wuyangmeite Decorative Material Co., Ltd. is a professional manufacturer of Plaster (Gypsum) Board Ceiling, Metal Ceiling, Baked Paint Keel (carrier, T-bar, T-grip, T-beam), Aluminum Alloy Keel (carrier, T-bar, T-grip, T-beam), Plaster (Gypsum) Cornice/Line, etc. WuYangMeiTe is one of the most famous brand in the decoration field of China.
        Our products are manufactured with advanced techniques and technologies, and they are Reinforced, Light-weight, Musty-proof, Non-distortion, Yellowing-resistant and Environmental-protective. With faddish design, good quality and easy installation, they are widely used in hotels, hospitals, big halls, etc.
        We will offer you high-quality products, competitive prices and best services, contact us now!}